The Foseco Foundryman's Handbook
The Foseco Ferrous Foundryman's Handbook is a practical reference book that provides practical guidance, suggestions and recommendations on making castings by all common casting methods. Aided by clear diagrams and comprehensive physical data tables, the text defines technical terms, details the procedures used in good foundry practice, describes the industrial plant used and gives lucid explanations of casting phenomena with helpful advice on overcoming problems encountered in casting processes. Essential reading for anyone with an interest in foundry practice. The 1st edition was published in 1942, today it is available in its 11th edition.
Foseco Ferrous Foundryman's Handbook
The Foseco Ferrous Foundryman's Handbook is a practical reference book for all those concerned with making castings in any of the commonly used alloys, by any of the usual moulding methods. International SI units are used throughout, but in almost all cases conversions to the more familiar Metric and Imperial units are given. Wherever possible, Casting Alloy Specifications include equivalent specifications for several countries as well as international specifications. Individual chapters cover the casting of all types of cast-iron and steel. For each group of alloys, specifications and typical applications are described, together with details of melting practice, metal treatment and casting practice. Sand moulding materials, including green sand and chemically bonded sands are also included.
Foseco Non Ferrous Foundryman's Handbook
The Non-Ferrous Foundryman's Handbook provides a practical reference book for all those concerned with dealing with aluminium, copper and magnesium casting alloys.International SI units are used throughout, but in almost all cases conversions to the more familiar Metric and Imperial units are given. Wherever possible, Casting Alloy Specifications include equivalent specifications for several countries as well as international specifications. Individual chapters cover the casting of all types of non-ferrous metals. For each group of alloys, specifications, and typical applications are described, together with details of melting practice, metal treatment and casting practice. Sand moulding materials, including green sand and chemically bonded sands are also included. Recently there have been many major technical developments including new sand binders, the adoption of metal filtration of castings and widespread use of computers for the optimisation of feeder design.